The IW-60H features the "Z" shape aperture at the angle shear station, which makes this model capable of doing both the internal and external miter shear on angles. The round/square bar shearing on this model is a stand-alone station that has large shearing capability.
Model | IW-45M | IW-60H |
Punching | ||
Punching Force | 45 Ton | 60 Ton |
Punch Capacity | ø22 x 15 | ø28 x 15 |
(Diameter x Thickness) | ø40 x 8 | ø40 x 11 |
Throat Depth | 175 | 220 |
Max. Stroke Length | 35 | 55 |
Cycles / Min. (15mm stroke) | 31 | 29 |
Working Height Up to Die | 970 | 1000 |
Angle Shearing | ||
At 90° Shearing | 75 x 75 x 6 | 100 x 100 x 13 |
At 45° Miter Shearing | 50 x 50 x 6 | 75 x 75 x 6 |
Working Height | 1120 | 1236 |
Flat Shearing | ||
Flat Bar Shear | 350 x 8 | 350 x 15 |
(Width x Thickness) | 180 x 12 | 210 x 20 |
Blade Length | 360 | 360 |
Angle Flange Trim | 75 | 100 |
Working Height | 970 | 1006 |
Bar Shearing | ||
Round Bar Shear | ø25 | ø40 |
Square Bar Shear | 25 x 25 | 38 x 38 |
Channel Shear | - | 100 x 50* |
Working Height | 1190 | 1260 |
Notching | ||
Rectangular Notcher (W x D x T) | - | 50.8 x 90 x 8 |
Vee-Notcher (Side x Side x T) | - | 90 x 90 x 10* |
Working Height | - | 1006 |
* : Optional Tooling
** : On IW-45M the notcher is optional tooling to be installed at the punching station.
Note: Based on low carbon / mild steel material strength of 45kg / mm² tensile. Design and specifications subject to change without notice. A 1-hole die holder and a 2-piece gauging table are provided as standard equipment on all single cylinder models.
Model | IW-45M | IW-60H |
Electric Power (HP) | 5 HP | 7.5 HP |
Net Weight (Apr.) | 830 kg | 1500 kg |
Gross Weight (Apr.) | 930 kg | 1650 kg |
Machine Dimension (Apr.) (L x W x H) | 1260 x 700 x 1350 | 1460 x 770 x 1560 |
Packing Dimension (Apr.) (L x W x H) | 1530 x 860 x 1630 | 1730 x 930 x 1840 |