Double Cylinder

IW-60S ~ IW-165SD

The double cylinder "S/SD" series are in the Sunrise tradition of well engineered ironworkers built for high power, quality, and reliability. These ironworkers have two control foot pedals, and separate operations can be safely performed simultaneously. The low pressure setting for tool change provides maximum operation safety. The long punching cylinder stroke and deep throat enable mounting a wide range of special equipment. The large punching base with the "T-slot" mounting provides a solid base for securing the punching tooling, as well as a wide range of optional and custom designed tooling.


Model IW-60S
IW-60SD
IW-80S
IW-80SD
IW-100S
IW-100SD
IW-125S
IW-125SD
IW-165SD
Punching          
Punching Force 60 Ton 80 Ton 100 Ton 125 Ton 165 Ton
Punch Capacity ø22 x 20 ø26 x 22 ø28 x 26 ø33 x 27 ø37 x 32
(Diameter x Thickness) ø50 x 9 ø50 x 12 ø50 x 15 ø50 x 18 ø50 x 24
Throat Depth (S) 310 310 310 310 -
Throat Depth (SD) 510 510 510 510 510
Channel Flange Punch (Height) 180 180 180 180 180
Max. Stroke Length 100 100 100 100 100
Cycles / Min. (20mm stroke) 30 29 28 28 29
Working Height Up to Die 1010 1050 1044 1069 1050
Angle Shearing          
At 90° Shearing 130 x 130 x 12 150 x 150 x 12 150 x 150 x 15 150 x 150 x 15 200 x 200 x 20
At 45° Miter Shearing 65 x 65 x 8 75 x 75 x 9 75 x 75 x 9 75 x 75 x 9 75 x 75 x 9
Working Height 1115 1165 1216 1185 1185
Flat Shearing          
Flat Bar Shearing 350 x 15 460 x 15 610 x 16 610 x 18 760 x 20
(Width x Thickness) 240 x 20 300 x 20 400 x 20 400 x 25 400 x 30
Blade Length 360 465 620 620 770
Angle Flange Trim 100 100 100 100 120
Working Height 910 926 954 920 920
Bar Shearing          
Round Bar Shear ø40 ø45 ø45 ø50 ø60
Square Bar Shear 38 x 38 45 x 45 45 x 45 50 x 50 60 x 60
Channel Shear 125 x 65* 150 x 75* 150 x 75* 150 x 75* 200 x 90*
I Beam Shear - 150 x 75* 150 x 75* 150 x 75* 200 x 100*
Working Height 1220 1270 1332 1310 1370
Notching          
Rectangular Notcher (W x D x T) 50.8 x 90 x 9 50.8 x 90 x 12 63.5 x 90 x 12 63.5 x 90 x 13 63.5 x 90 x 16
Vee-Notcher (Side x Side x T) 90 x 90 x 10* 90 x 90 x 12* 105 x 105 x 12* 105 x 105 x 13* 105 x 105 x 16*
Working Height 910 926 954 920 920
Special Tooling          
Large Vee-Notcher (Side x Side x T) 145 x 145 x 8* 145 x 145 x 10* 145 x 145 x 12* 145 x 145 x 12* 145 x 145 x 12*
Single Vee Press Brake (W x T) 250 x 12* 250 x 12* 250 x 15* 250 x 20* 250 x 20*
Multi Vee Press Brake (W x T) 500 x 5* 500 x 5* 700 x 5* 700 x 5* 700 x 5*
Angle Bending 100 x 100 x 7* 100 x 100 x 7* 100 x 100 x 13* 100 x 100 x 13* 100 x 100 x 13*
Pipe Notching ø100* ø100* ø100* ø100* ø100*
Other          
Electric Power (HP 7.5 HP 10 HP 10 HP 15 HP 20 HP
Net Weight (Appr.) S: 1780 kg 2120 kg 2880 kg 3300 kg -
SD: 2060 kg 2550 kg 3340 kg 3900 kg 5180 kg
Gross Weight (Appr.) S: 1890 kg 2250 kg 3050 kg 3530 kg -
SD: 2230 kg 2760 kg 3600 kg 4160 kg 5480 kg
Machine Dimension (Appr.) (LxWxH) S: 1700 x 800 x 1710 1830x820x1760 2100x860x1810 2170x1030x1850 -
SD: 2070 x 800 x 1710 2220x820x1730 2460x860x1810 2490x1030x1850 2710x1070x2010
Packing Dimension (Appr.) (LxWxH) S: 1930 x 900 x 1940 2070x940x1960 2350x950x2100 2430x1150x2070 -
SD: 2290 x 900 x 1950 2450x960x1985 2700x1000x2060 2730x1150x2100 2940x1210x2270

* : Optional Tooling

Based on low carbon / mild steel material strength of 45kg / mm² tensile. Design and specifications subject to change without notice. A 2-hole overhang die holder and a 2-piece gauging table are provided as standard equipment on all dual cylinder ironworkers.


Large Vee-Notcher (Side x Side x T) 145 x 145 x 8* 145 x 145 x 10* 145 x 145 x 12* 145 x 145 x 13* 145 x 145 x 13*
Single Vee Press Brake (W x T) 250 x 15* 250 x 15* 250 x 20* 250 x 20* 250 x 20*
Multi Vee Press Brake (W x T) 500 x 5* 500 x 5* 700 x 5* 700 x 5* 700 x 5*
Angle Bending 102 x 6* 102 x 8* 102 x 13* 102 x 13* 102 x 13*
Pipe Notching ø100* ø100* ø100* ø100* ø100*

* : Optional Tooling

Based on low carbon / mild steel material strength of 45kg / mm² tensile. Design and specifications subject to change without notice. A 2-hole overhang die holder and a 2-piece gauging table are provided as standard equipment on all dual cylinder ironworkers.


Model IW-60S
IW-60SD
IW-80S
IW-80SD
IW-100S
IW-100SD
IW-125S
IW-125SD
IW-165SD
Electric Power (HP) 7.5 HP 10 HP 10 HP 15 HP 20 HP
Net Weight (Apr.) (S) 1800 kg 2180 kg 2950 kg 3340 kg -
Net Weight (Apr.) (SD) 2200 kg 2650 kg 3450 kg 3950 kg 4950 kg
Gross Weight (Apr.) (S) 1950 kg 2360 kg 3180 kg 3590 kg -
Gross Weight (Apr.) (SD) 2380 kg 2880 kg 3700 kg 4220 kg 5250 kg
Machine Dimension (Apr.)
(S) (L x W x H)
1700x800x1710 1830x820x1760 2100x860x1810 2170x1030x1850 -
Machine Dimension (Apr.)
(SD) (L x W x H)
2070x800x1710 2210x820x1760 2460x860x1810 2490x1030x1850 2710x1070x2010
Packing Dimension (Apr.)
(S) (L x W x H)
1970x959x1990 2100x980x2040 2370x1020x2090 2440x1190x2130 -
Packing Dimension (Apr.)
(SD) (L x W x H)
2340x960x1990 2480x980x2040 2730x1020x2090 2760x1190x2130 2980x1230x2290